pallet wrapper with corner protection

1 Technology data:

Max load size: 1200 (L)×1200(W) ×1600(H)mm

Conveyor height: 550mm

Packing efficiency: 0-60 loads / hour

Rotary arm speed: 0-25rpm

Power supply: 4.0 KW  415V 50HZ 3Phase

Max load capacity: 2000kgs

Wrapping requirement: start from 100mm above conveyor

Working ambiance: Indoor: normal temperature

2 Wrapping material:

Stretch wrapping film:           Core size: 3``

Film width:                    500mm

Diameter:                     max 260mm

Thickness:                     17-35μm

One roll of stretch film to be supplied along with machine for trial running

3 Utility:

Compressed air

Pressure:            0.5-0.7 MPa

Dew point:          +2-+10℃  (7bar, +2-+10℃)

Filter:              40 µm

Air quality:         oil and water free air  

Air consumption:    1000ml/min

Power supply:       415V (+/- 10%)/3phase/50Hz (+/- 1Hz)

Power installed:      ≈4kw

4 Supply scope

4.1 Machine main frame                                     1set

4.2 Driving device for rotary arm                               1set

4.3 Film carriage                                             1 set

4.4 Film carriage delivery device                                 1set

4.5 Film auto feeding and cutting device                           1set

4.6 Pneumatic control system                                  1set

4.7 Safety interlock device                              1set

4.8 Electrical control system                              1set    

4.9 Safety fencing with light curtain                      option

4.10  Maintenance platform                               option

Paper corner applicator

Main introduction

The applicator can sense the position of the pallet, and then adjust the position of the installation. The working center should be same as the wrapper.

Auto sense the paper board quantity and alarm when lack of material, so that the paper boards can be feed manually;

The paper board should be in same level without angle;

Paper corner magazine 2pcs for each applicator, feed the paper board vertically;

The device should be connected with the main wrapper so that whole system work automatically;

The buyer should provide the exact specification of the paper board for confirmation. The positioning of the paper board should be based on the bottom line of the board.

Specification of the paper board

Dimension: 50×5mm;

Height: ≤1500mm;

Angle: 90±1°

Paper corner magazine capacity: 40pcs

Quantity of paper corner magazine: 2;

Motor: SEW brand

The system can be fit for a wrapper that wraps 40 pallets/H. After finish one magazine, the applicator will automatically goes to the second one, so that the first one will be filled with paper board manually.

PLC, screen and inverter: Siemens;

Motor: SEW brand;

Pneumatic: Festo

Product Categories : Wrapping Machine > R Series Rotary Arm Stretch Wrapping Machine